CALL US

Alloy Fusion’s Complete Projects Gallery

At Alloy Fusion Inc. we take pride in our work and the services that we provide our clients, and we are eager to share our wide product and service offering. So we invite you to take a browse through our project photo galleries to see some examples of our past work. Contact us today to get your next project started.

Refurbished Overhead Bridge Crane

5 Ton 1

This is a 5 ton crane that we removed with the 115’ of rail. We lengthened the bridge by 4 feet and installed it into a new GMI granite facility.

Miscellaneous Metals

60 Exeter Canopy

This is the shop fabrication portion of the canopy built at 60 Exeter in Oshawa.

Canopy Braces

This canopy with braces was built for Fulcrum Construction.

Canopy Fab 1

This is the shop fabrication portion of the canopy built at Exeter in Oshawa.

Front Left

This is a galvanized set of stairs built for Bombardier.

Front Right

This is a galvanized set of stairs built for Bombardier.

Pergola 3

This is a pergola in place which was installed on a high-rise in Toronto.

Pergola at 90

This is a pergola being installed on the 8th storey of a high-rise in Toronto. We also built this in 2 components on the ground and installed them for a perfect fit after the two components were completely welded.

Pergola Progress with High-Rise

This is a pergola that we installed on a high-rise in Toronto. We simply swung the 80 foot long section into place and nudged it with levers and straps. The placement process did not take more than 10 minutes to complete.

Structural Steel Renovations and Reinforcements

Beams & Columns

A very tricky installation of several galvanized reinforced beams and columns that had to be installed during the evening at In N Out Car Wash amongst an amazing amount of equipment, waterlines, electrical, heating and plumbing while leveling the roof during installation.

C2’s

This is a trussed column project for Merton and Lancaster. It’s hard to believe that you could make a junior channel strong enough to hold up a building with 2 stories above. We will clarify, though, that this was not our engineer’s idea.

Bandsaw & Coldsaw

This is a picture of part of our facility.

Custom Fabrication

Aluminum Cargo Trailer

King City Trailer uses us exclusively to perform all of their aluminum welding.

Aluminum Cargo Trailer Rear

King City Trailer uses us exclusively to perform all of their aluminum welding.

Grand Father Clocks

If you can imagine it, we can fabricate it.

Tickle Trunk

This compost trunk was built for a client with racoon problems. It was made with a deep lid so that the compost latch was exposed when the trunk was open. The lid turned out to be heavy enough to keep even the most determined of pests out.

Iron Worker

This is part of our custom fabrication facility.

L B II Rear Quarter - 1

This is one of 6 log splitters that we built called the Lightning Bolt. We have one left for sale, and we also rent one.

Mobile Welding and Onsite Torching

Welding Stations

This is a picture of part of our facility.

Welding Truck 2

We have a fleet of 5 service vehicles and 2 triaxle floats along with 3 scissor lifts for performing roof reinforcements.

Walers

We are called in often to install and remove walers, rakers and struts from various open cut excavations. It is a specialized installation and removal because crane time is always of the essence. Minutes and seconds count.

Struts

We are called in often to install and remove walers, rakers and struts from various open cut excavations. It is a specialized installation and removal because crane time is always of the essence. Minutes and seconds count.

Copyright Alloy Fusion Inc 2018 - Legal
Created by

Legal notice